muëcyestimate pro 26

v38 · Yield Analyzer · Photorealistic Render · Real logo · Smart Builder · Render w/ sketches (Gemini 2.5) · AI Preview · Linear/Detailed · Installation contract · Proposal generator · AI Studio · Market Check
No logo loaded
Default SVG · upload your logo
Final revenue
$0.00
Real costs
$90.24
Real profit
$0.00
Materials
$0.00
Installation to client
$0.00
Add-ons
$0.00

General summary

Project—
Client—
Materials (revenue)$0.00
Installation (client revenue)$0.00
Labor$0.00
Add-ons$0.00
Digital services$0.00
Carpenter payment$0.00
Difference vs Labor total$0.00
Subtotal$0.00
Administration (0%)$0.00
Profit (0%)$0.00
Designer (0%)$0.00
Tax (0%)$0.00
FINAL PRICE$0.00

Real financial summary

Final revenue incl. tax$0.00
Tax collected- $0.00
Revenue before tax$0.00
Materials cost- $0.00
Installation cost$0.00
Designer fee (0%)- $0.00
Real profit$0.00
If “Subtract installation as internal cost” is enabled, installation is deducted as a real internal cost and is not added to the client estimate. The designer percentage is still added to the final total.

Workshop / Carpenter Payment

Automatic payment breakdown based on your production rules. Cabinetry and closet inches are detected from the estimator. Paneling, curved work, shaker inches, and special cuts can be entered or adjusted below when needed.
Linear labor loaded$0.00From the Linear labor section
Additional labor loaded$0.00From the Additional labor section
Total carpenter payment$0.00Uses the exact total loaded in Labor
Difference vs Labor total$0.00Should remain $0.00 when payment is fully driven by Labor
Paneling square feet
Shaker inches override
Curved inches
Fluted / Rincomatic / 45° inches override
The workshop margin is calculated as client labor charged minus total carpenter payment.

Workshop transparent breakdown

This section shows exactly where the carpenter payment comes from. Each detected line, rate, override, and ignored auto-rule is listed below without changing your previous estimator behavior.

Detected workshop lines

SourceSpaceRuleCalculationTotal
No workshop-detected rows yet.

Detection notes

Linear labor loaded$0.00
Additional labor loaded$0.00
Carpenter payment sourceLabor tab
Total carpenter payment$0.00
Difference vs Labor total$0.00
Workshop auto-rules disabledCarpenter payment is now driven by the Labor tab so category auto-detection is no longer used for payment calculations.

Scope / Notes

Terms & Conditions

Lead Time

Materials database

Import a CSV with columns such as Material, Supplier, SKU, Unit, and Cost.
376 items
MaterialSupplierSKUUnitCostAction

Project materials

Type the material name in the search field or directly inside each material row to find it faster.
MaterialSupplierSKUUnitQtyUnit CostWaste %TotalAction
Total$0.00

Installation library

Base installation cost per item. If you want to charge a markup to the client, use “Installation charged to client %” above.
Installation itemBase costAction

Installation estimate

Installation itemQtyBase costTotalAction
Total$0.00

Labor

Reference rates for carpenter production payment: lineal cabinet general $5.6, cover $1, LED $0.50, closets $4, door closets 3/4" $1.6, lineal shaker $1.4, lineal rincomatic 45 c system $1.3, flutted sticks $2.3, curves panels $4.6, flat paneling $4.

Linear labor

DescriptionLinear inches$ / inchTotalAction
Total$0.00

Additional labor

ConceptQtyUnitTotalAction
Total$0.00

Add-ons / scope descriptions

Use this area in two ways: priced add-ons that affect totals, or quote-only scope descriptions that appear in the proposal without affecting pricing.
SpaceDescriptionQuote onlyQtyUnitTotalAction
Total$0.00

Linear inch estimator

First define the price per inch for each category. Then add lines for Kitchen, Laundry, Vanity, Closet, etc.

Linear catalog

Category$/inAction

Linear estimate

SpaceCategoryItemInchesQty$/inTotalAction
Total$0.00

Digital services library

ServiceTypeRateUnitAction

Digital services estimate

ServiceUnitQtyRateTotalAction
Total$0.00

AI Description Studio

Upload project reference images, describe what you want, and generate polished estimate language for the proposal. The generated text can be pushed directly into the proposal, scope notes, or terms. Your API key stays only in this browser and is not exported in the project JSON.

Reference images

Add inspiration images, site photos, renders, sketches, or screenshots. You can type a short caption under each image to help the AI understand what matters.
No images loaded yet.

📐 Material Yield Analyzer · Sheets per linear inch

▲
Calculate sheet usage per cabinet, separating exterior (premium melamine for fronts/exposed surfaces) from interior (economy melamine for carcass and drawer boxes). Helps you estimate sheets per linear inch and project totals so material costs are predictable.
Cabinet dimensions
Components
Materials (from Materials Database)
EXTERIOR (premium)
• 2 sides exposed (36×24 each): 1728 sq in
• top exposed (24×24): 576 sq in
2304 sq in → 1 sheet (raw 0.50)
Select a material to see cost
INTERIOR (economy)
• bottom (24×24): 576 sq in
• back panel (24×36): 864 sq in
1440 sq in → 1 sheet (raw 0.31)
Select a material to see cost
Per linear inch ratios: exterior 0.0208 sheets/in · interior 0.0130 sheets/in · combined 0.0339 sheets/in
Cabinet 24" wide: 0.81 raw sheets total → 2 purchased
Select exterior and/or interior material above to enable "Add to Materials".
Project extrapolation
Enter the total linear inches of your project (e.g. 515" for the Master Attic closet) to get a sheet count and material cost estimate based on the per-cabinet ratio above.
For 92 linear inches of project at this cabinet's ratio:
• Exterior: ~1.9 sheets raw → 2 sheets to buy
• Interior: ~1.2 sheets raw → 2 sheets to buy

⭐ GENERATE COMPLETE ESTIMATE

⭐ Generate complete estimate
Use all uploaded renderings, photos, sketches, or plan screenshots together with your prompt to generate a structured Muëcy estimate JSON. You can add more than one image when the project needs multiple angles to understand the full scope.
Revisa y edita antes de aplicar

AI generation

Provider🟢 OpenAIAuto-detected from key prefix & model name
OpenAI: key starts with sk- · models: gpt-4.1-mini, gpt-4o, o3-mini
Claude: key starts with sk-ant- · models: claude-sonnet-4-5, claude-haiku-4-5-20251001, claude-opus-4-6
Gemini: key starts with AIza · models: gemini-2.0-flash, gemini-1.5-pro
📋 Auto-context attached to your prompt: Your 376 materials with real costs, 12 installation items, 20 linear categories, and your 20/60/10% margin rates are automatically injected. The AI will use YOUR prices and references instead of inventing.
💼 Materials approach for the AI:
Fast estimate. The AI uses your linear catalog ($/inch per category like Kitchen $16.70, Vanity $18.90) instead of listing materials one by one. Best for quick quotes when you don't need item-level breakdowns.

🪄 Smart Estimate Builder · Quick guided form

▼
Fastest way to get accurate estimates. Fill the fields below for one or more spaces and the system builds a precise prompt with YOUR rates and materials. The AI will then generate the estimate using your linear catalog rates and material database — no guessing.
📍 Space 1
📐 Type & Dimensions
🎨 Materials
Optional. When checked, the prompt uses the Yield Analyzer snapshot as the material quantity reference. Leave unchecked for fast/manual estimates.
⚙️ Advanced Components & Fabrication Optional manual overrides
Use only when you want to force components or special fabrication manually. Doors and rod type were removed from the main flow so AI Studio can infer them from the prompt/images.
🔧 Priced components
✨ Special fabrication
🧲 Hardware options
🧮 Muëcy labor constants
Leave blank to let the AI use only the fields you fill. Millwork defaults to main linear inches when empty.
🎯 Finish & Paint System
Simple painter calculation: paint sqft × painter rate. Default rate is $15/sqft and remains editable. The result is sent to AI as Labor Extra, not materials.
🛠 Installation control
Installation rows are sent to the AI as structured references. Any library-only prices are marked manual/library review.
📝 Notes

🎨 Photorealistic Render · OpenAI GPT Image

Connected server-side · no browser API key required · accepts sketches/photos as references
⚠ No images checked — uploaded images will still be used automatically if available
Generate photorealistic 3D renders using your Smart Builder data + uploaded sketches/photos as actual visual reference. OpenAI GPT Image will respect the proportions and layout of your sketches/photos. Connected securely through the server.

Market Check

Use comparable benchmarks to see whether your suggested price sits below market, aligned, or at a premium level. This module does not browse the internet by itself; it compares your estimator result against the live reference rows you load here.
Suggested client total
$0.00
Comparable average
$0.00
Comparable range
—
Positioning
—
Recommended quote range
—
Confidence
Low
Comparison mode
Project type
Area / market
Manual suggested override
Suggested metric$0.00
Comparable average$0.00
Comparable range—
Benchmarks loaded0
Market area—
Project type—
Tip: if you leave manual suggested override at 0, the module uses the estimator total automatically.
SourceComparable descriptionTotal / rateNotesAction

Live Market Review

This uses your OpenAI API key plus external web results through the Responses API to suggest a rough market range and a positioning note. Review the result before quoting.
Project type
Location
Scope
The result is a commercial guide, not legal pricing advice. It depends on your API key, billing, and current web-accessible references.

Market interpretation

Proposal view

Project Proposal
Logo / Shop header space
Quote No:—
Date:May 18, 2026
Client:—
Project:—
Client:—
Contact:—
Address:—
Project:—
We are pleased to present this proposal for the following custom millwork scope, fabricated and installed in accordance with the approved design, materials, and specifications.
Total Investment
$0.00
Prepared according to the current estimator scope and pricing.
Investment by Space
Project Total$0.00
Financial Summary
Materials$0.00
Installation$0.00
Labor$0.00
Add-ons$0.00
Digital services$0.00
Carpenter payment$0.00
Difference vs Labor total$0.00
Subtotal$0.00
Administration (0%)$0.00
Profit (0%)$0.00
Designer (0%)$0.00
Tax (0%)$0.00
TOTAL$0.00
Carpenter Payment Trace
SourceSpaceRuleCalculationTotal
No lines are currently feeding carpenter payment.
This total comes directly from the Labor tab rows shown above. Notes: Workshop auto-rules disabled: Carpenter payment is now driven by the Labor tab so category auto-detection is no longer used for payment calculations.
Scope / Notes
All millwork shall be fabricated in accordance with approved shop drawings, material selections, and Muëcy Standard® criteria. Field dimensions must be verified prior to production. If floors, walls, ceilings, or site conditions are unfinished or not within tolerance, fillers, scribes, and reasonable technical adjustments may be required. Renderings and visuals are for reference only. Electrical points, low-voltage provisions, LED locations, and appliance clearances must be reviewed and coordinated before production release. Any work or revision outside the approved scope shall be processed as a change order and may affect cost and lead time.
Lead Time
Lead times begin on the date the initial payment is received. • 5 days for design development and correction, including up to 2 revisions within the contracted scope. • 45 business days for fabrication of the project and internal review. • 10 days for delivery and installation. Lead times may vary depending on project scope, approvals, site readiness, access conditions, specialty materials, and any approved changes during the process.
Terms & Conditions
Payment terms: 50% deposit upon project approval, 40% due on the day of delivery, and 10% due once the punch list and final walkthrough have been completed and signed off by the client as full project acceptance. Materials, finishes, and dimensions are subject to final approval before production. Muëcy is not responsible for delays caused by pending approvals, site restrictions, or third-party trades. Any third-party electrical, plumbing, stone, or related work not contracted directly through Muëcy remains under the responsibility of others.
Sincerely, Authorized Representative
Production Agreement / Carpenter Contract
Logo / Shop header space
Date:May 18, 2026
Contractor:—
Project:—
Contractor / Shop:—
Client:—
Contact:—
Address:—
Project:—
Agreement Date:May 18, 2026
By this agreement, Muëcy assigns ________________ to produce the project custom millwork in accordance with the approved plans, scope, technical details, and project specifications. The carpenter payment for this agreement is driven by the exact values loaded in the Labor tab of the estimator, which serve as the production payment reference for workshop control, assembly verification, internal quality review, and approval before delivery.
Production Payment
$0.00
50% at project start and 50% upon workshop approval.
Estimated total carpenter payment based on the Labor tab: $0.00.
Production Rates
Labor rates
Driven by the exact values loaded in the Labor tab
—
Labor lines included
Detected scopeComplete according to project and estimator
Workshop Conditions
Production payment structure: 50% at project start. 50% upon workshop approval. Workshop responsibilities: All pieces must be fully assembled, squared, and verified in the workshop before requesting approval. The production team is responsible for correct construction, structural integrity, edge quality, alignment of fronts, smooth operation of hardware, and readiness for installation. The workshop team is not authorized to change dimensions, details, or construction criteria without approval. No components shall be delivered until Muëcy has reviewed and approved the production in the shop. Quality and control: Any defect, missing part, correction, or inconsistency detected during shop review must be resolved before delivery. The carpenter payment shown above follows the exact labor lines loaded in the estimator. Any change to scope, dimensions, methods, or operations that affects labor must be updated in the estimator and approved before production continues.
Contractor Signature
Authorized Representative
This agreement is governed by the approved plans, dimensions, production standards, tolerances, and scope established for the project. The header area is intentionally left generic so the servicing shop may place its own logo or identification.
Materials List
Logo / Shop header space
Date:April 7, 2026
Client:EDDY TAWIL
Project:LAUNDRY ROCK RESIDENCE
Contact:
Address:
Total material cost:$3,802.00
Loaded Materials
MaterialSupplierSKUUnitQtyUnit CostWaste %Total
beige textile 5'x9'dixie—sheet32$82.000%$2,624.00
roll edge beige textile 246 ft——roll4$55.000%$220.00
Blum Tandem 12Imeca563H5330Bpair3$30.000%$90.00
rod oval3G & S group—each1$12.000%$12.00
brakets 12"x1 1/2"Home depot—each4$19.000%$76.00
hinge blum overlayimeca—each90$7.000%$630.00
roll edge beige textile 1 5/8" 246 ft——roll1$150.000%$150.00
Rows loaded7
Materials total$3,802.00
This sheet is intended as a purchasing reference based on the materials currently loaded in the estimator.
Final project total: $0.00Real profit: $0.00
Final revenue$0.00
Materials cost- $0.00
Installation cost$0.00
Carpenter payment- $0.00
Designer fee (0%)- $0.00
Real profit$0.00